Diy Gymnastics Parallel Bars: How To Build Your Own At Home

Mai 25, 2023 Kommentar veröffentlichen

Table of Contents [Show]

Handstand bars DIY Parallel Bars for gymnastics DIY YouTube from www.youtube.com

Introduction

Gymnastics is a great way to stay active and healthy, but not everyone has access to a gym or the equipment they need to practice their skills. One piece of equipment that can be particularly difficult to find is a set of parallel bars. However, with a little bit of DIY know-how, you can easily build your own parallel bars at home. In this article, we'll show you how to get started.

Materials

Before you begin, you'll need to gather some materials. Here's what you'll need:

Two wooden dowels, each about 1.5 meters long and 10 centimeters in diameter
Four metal pipes, each about 1 meter long and 2.5 centimeters in diameter
Eight metal flanges
Eight screws and bolts
A saw
A drill
Sandpaper

Building the Base

The first step in building your parallel bars is to create the base. Take your two wooden dowels and mark the center of each one. Then, use your saw to cut each dowel in half at the center mark. Sand the ends of each piece to remove any rough edges. Next, take your four metal pipes and attach one flange to each end of each pipe using screws and bolts. Once you've done this, place two of the pipes parallel to each other on the ground, with the flanges facing up. Then, place one of the wooden dowel pieces on top of the pipes, centered between them. Repeat this with the other two pipes and the other wooden dowel piece.

Securing the Bars

Now that you have your base in place, it's time to secure the bars. Take one of the remaining flanges and attach it to the top of one of the wooden dowel pieces, near the end. Then, place one of the metal pipes into the flange and secure it with screws and bolts. Repeat this process on the other side, so that you have one bar attached to each wooden dowel piece.

Finishing Touches

Your parallel bars are almost complete! The last step is to add some finishing touches. You can paint the wooden dowels and metal pipes if you'd like, or add some grip tape to the bars to make them easier to grip. You may also want to add some rubber feet to the bottom of the flanges to keep the bars from slipping.

Conclusion

With just a few simple materials and some DIY skills, you can easily build your own gymnastics parallel bars at home. This is a great way to stay active and work on your skills, even if you don't have access to a gym or other equipment. Give it a try and see how far you can go!